For notices and handouts, choose a matte or uncoated sheet, and go heavier than ordinary office paper if you print on both sides. Those two choices deal with the two most common problems: glare and show-through.
This page covers finish, weight terms and tinted paper. It ends with a short test you can run before you print the full set. For printing without color, read printing in black and white.
Matte, satin or gloss
A printer's paper guide splits coated paper into three finishes: gloss, silk or satin, and matte. Gloss has the highest sheen. A matte-coated sheet is non-glossy and flat-looking, with little sheen. Satin sits between the two. Uncoated paper has no sealant layer at all.
A shiny surface throws light back at the reader. Under a ceiling lamp or beside a window, part of a glossy page can turn into a bright patch. A wall notice is most at risk, because people read it from the side and at an angle.
| Finish | How the guide describes it | What to expect |
|---|---|---|
| Gloss | Highest sheen, excellent color definition | Most likely to glare. Better for photos viewed straight on |
| Satin or silk | A popular compromise, less shiny than gloss | Fine for handouts held in the hand |
| Matte | Non-glossy and flat-looking, more opaque than gloss and satin | A sensible choice for text-heavy pages and wall notices |
| Uncoated | No sealant coating. Smooth types suit text-only books | Low sheen. Photos can look duller |
The glare notes in the last column are practical advice. The descriptions of each finish come from the printer's guide.
Weight, gsm and show-through
Paper weight is given in grams per square meter, written gsm or g/m². Typical office paper is 80 g/m². One printer's guide lists 80 to 115 gsm for book text and 120 to 170 gsm for leaflets and fliers.
Heavier paper is generally thicker. Two sheets of the same weight can still feel different, because thickness also depends on how densely the fibers are packed.
Show-through is about opacity. The same guide says a paper's opacity decides how much printing shows through on the reverse side. Opacity depends on weight, ingredients and absorbency. Matte and satin papers are generally more opaque than gloss.
Some labels give a weight per ream, written lb, instead of gsm. Treat those numbers with care. Each type of paper is measured on its own basis sheet size, so an lb figure only compares fairly within one paper type. When you can, compare gsm.
Solid dark blocks and large photos make show-through worse on the other side of the sheet. If your layout has them, move up a weight or leave the reverse blank.
Before: A two-sided handout on thin gloss paper. The back page shows through, and the front glares under the room lights.
After: The same handout on a matte sheet heavier than office paper. Dark ink, at most a pale tint, and a test copy read under the room lights first.
Does a tinted sheet keep enough contrast?
A tint narrows the gap between ink and paper. WCAG asks for a contrast ratio of at least 4.5:1 for body text and 3:1 for large-scale text, which means 18 point, or 14 point bold. WCAG is written for screens. Still, the ratio gives you a fair yardstick for a printed page.
Black ink on a pale tint leaves plenty of room. Gray ink, thin letters or a mid-tone sheet leave very little. Choose the paper first, then the ink. The page on text and background contrast explains how the ratio works.
A tint also matters when someone copies the page in black and white. It turns into a gray background behind the words.
If you use a tinted sheet for a series of notices, use the same pale tint each time. Readers learn to spot it, and your test results stay valid.
Test a sample before the full run
Fix the words before you fix the paper. A last read of the text in the Easy-Read Editor takes a minute and saves a reprint.
Then print one copy on the exact paper you plan to use. Work through this list.
- Hold the sample up to a window. Can you read the other side?
- Tilt it under the room lights. Does a bright patch cover any words?
- Read it from the distance where people will stand. For wall pages, see posting notices on a wall.
- If the paper is tinted, check it with black ink and with gray ink.
- Fold or punch one copy if the real ones will be folded or punched.
- Ask the print shop for a sample sheet if you cannot test at home.
Common mistakes
- Judging paper in the shop. The light in a shop is not the light in your hall. Test where the page will be read.
- Gloss for a wall notice. Windows and lamps can make glare worse on a vertical surface.
- Thin sheets for two-sided pages. Print one side only, or move up a weight.
- Comparing lb and gsm numbers. They are different systems. Compare like with like.
- A strong tint with gray text. Both lower contrast. Together they can lose the words.
- Proofing on one paper and printing on another. Print the final proof on the final stock.
FAQ
Is matte paper always better than glossy?
No. Gloss gives sharp, vivid color, which suits photos. For text-heavy notices and handouts, matte reduces glare. Choose by how the page will be used.
What gsm should a handout use?
There is no single right number. One printer's guide lists 120 to 170 gsm for leaflets and 80 to 115 gsm for book text. Test your own sheet for show-through. The advice on group handouts covers the rest of the layout.
Does tinted paper make text easier to read?
A tint changes contrast. It does not make letters clearer. Keep the tint pale, keep the ink dark and test a sample.
Can thin paper work at all?
Yes, for one-sided pages. Check for show-through with the window test first. Two-sided pages need a heavier sheet.
Sources
Each page below was opened and read on the date shown. Where a fact comes from one of them, the guide says so.
- What's The Best Paper For Printing? (Holywell Press) Checked November 19, 2026
- Grammage (Wikipedia) Checked November 19, 2026
- Understanding Success Criterion 1.4.3: Contrast (Minimum) Checked November 19, 2026
This guide gives general information about readability. See the Disclaimer. To report a mistake, use the Corrections page.