Leave a margin on every side, and add extra on the edge that will be bound or punched. In Word, each page starts with a one-inch margin. That is a sensible starting point for loose pages.

Many printers cannot reach the very edge of a sheet. Text placed there gets cut. This page explains the limit, how much room binding needs, and where to change margins in a word processor and a browser.

The edge a printer cannot reach

Microsoft's help page for Edge describes the Minimum margin option this way: many printers need a margin of around 0.25 inch (6.35 mm) on all sides. It adds that this varies, and some printers allow less. Your printer may differ.

So a margin below that line is a risk. Letters near the edge can lose a sliver or a whole word. A page number in the corner is often one of the first things lost.

You can find your own printer's limit in a minute. Print a page with a thin frame drawn close to the edges. If a side of the frame is missing, that margin is too small for this printer.

The same page lists the choices you get in the print dialog.

SettingWhat it doesWhen to use it
DefaultLeaves 1-inch margins on all sidesMost loose pages
MinimumPulls the content out toward the printer's limitA page runs a few lines over. Check the preview first
NoneRemoves margins on all sidesRarely. Text near the edge can be cut
CustomYou enter the top, bottom, left and right marginsBinding, punched pages, extra room

Edge also has a Preview button for Custom margins. Use it to see the result before you send the page to the printer. The print preview checklist shows what else to look for.

Room for binding and hole punches

A bound or punched page loses space on one side. Word handles this with a gutter margin. Microsoft's help page says a gutter adds extra space to the side, top or inside margin of a document you plan to bind. The point is that the binding does not hide the text.

To add one in Word, go to Layout, then Margins, then Custom Margins. Enter a width in the Gutter box. Then choose Left or Top in the Gutter position box. Menu names can differ by version.

Word has a few layouts that set the gutter position for you: Mirror margins, 2 pages per sheet and Book fold. With those, the Gutter position box is not available.

Printing on both sides changes the picture. The bound edge sits on the left of one page and on the right of the next. Microsoft's page says Word can set margins for facing pages, which is the case you need here. Look for the Mirror margins option in Word's margin settings.

How wide should the gutter be? The help page gives no number. Start with an extra half inch, punch one test sheet, and look for any letter that touches a hole. Adjust from there.

Headers, footers and page numbers

Headers and footers live in the margin space. If the top and bottom margins are tight, there is no room for them. The page number can collide with the last line of text or slip off the sheet.

Edge's Headers and footers option adds the current date to the header and the page number to the footer. Turn it on and check the preview. If the footer touches the text, raise the bottom margin.

Before: A one-page notice with a tiny margin. The last line and the page number print cut off.

After: The same notice with a one-inch margin. The text is trimmed to fit, and the page number sits clear of the last line.

Set margins in Word and in a browser

In Word:

  1. Select Layout, then Margins.
  2. Pick a ready-made setting, or select Custom Margins.
  3. Enter the top, bottom, left and right values, plus a gutter if the pages will be bound.

In Edge, open the print dialog with Ctrl+P, expand More settings and find Margins. A browser has its own margin setting, separate from the page design. Other browsers use similar names, but check yours.

Before you adjust anything, ask if the page needs shorter text rather than smaller margins. The Easy-Read Editor can help you trim a draft. For wide text lines, see column width.

Margin test before you print the full run

  • Every side has at least the printer's minimum margin.
  • The bound or punched edge has extra room.
  • The page number and any footer sit clear of the last line of text.
  • Borders, shaded bars and boxes do not run to the sheet edge.
  • One test page printed, with one hole punched or one fold made.

Common mistakes

  • Setting None to fit one more line. The last line may print cut off.
  • The same margins on both sides of a bound document. The gutter side needs more room than the outer edge.
  • Boxes and bars that touch the edge. Many printers cannot reach there, so a white strip appears.
  • Trusting the screen. Margins that look fine on screen can print differently on another printer.
  • Shrinking margins to save pages. Cut text instead. The page on large print shows why margins matter more as type grows.

FAQ

What margin works on most printers?

A one-inch margin clears the roughly 0.25 inch that many printers need. Word starts with one inch, and so does the Default option in Edge.

What is a gutter margin?

It is extra space added to one side or the top of the page for binding. It keeps the binding from covering text.

Why was my page number cut off?

It sat too close to the edge, or the footer collided with the text. Raise the bottom margin and print the preview again.

Do Word and a browser use the same margins?

No. Word uses the Layout settings in the file. A browser uses the Margins option in its print dialog. If you save a page as a PDF, see saving a PDF from your browser.

Sources

Each page below was opened and read on the date shown. Where a fact comes from one of them, the guide says so.

This guide gives general information about readability. See the Disclaimer. To report a mistake, use the Corrections page.